[asterisk-dev] UDPTL sent packet on different port than defined on .conf file !!!

[Kevin P. Fleming]

Serge Berney wrote:

> There’s an issue on “UDPTL.c” ; I configured “udptlstart” and
> “udptlstop” port’s number on “udptl.conf” file.

This is not a development question, and belongs on the asterisk-users
mailing list.

> VERBOSE[9803] logger.c:  Sent UDPTL packet to w.x.y.z:*4940* (type 0,
> seq 0, len 6)
> 
>  
> 
> As see, port to send packet is not filtered by entered value on .conf file !
> 
> It’s seems that “s->them.sin_port” contain a wrong value ?!?!

You are mistaken. The port that Asterisk sends *to* is defined by the
other endpoint when it sends us SIP/SDP signaling. The configuration in
udptl.conf has nothing at all to do with this, it controls the ports
that Asterisk will choose to *receive* UDPTL traffic.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
skype: kpfleming | jabber: kpfleming at digium.com
Check us out at www.digium.com & www.asterisk.org