[asterisk-dev] MASTER CLOCK selection for ZAP/DAHDI span does not work (always 1st active span...)

[Tzafrir Cohen]

On Mon, Nov 24, 2008 at 11:03:56PM +0500, Anton VG wrote:
> Hello,
> 
> Googled everywhere with no luck to get an answer
> 
> I've always 1st NOT RED TDM span as master, regardles settings in
> DAHDI or ZAPTEL configs:
> 
> DAHDI PC (1.6.0.1)
> 
> span=5,1,0,ccs,hdb3
> bchan=126-155
> echocanceller=mg2,126-155
> mtp2=125
> 
> ast1:/proc/dahdi# cat 1
> Span 1: WPE1/0 "wanpipe2 card 0" (MASTER) HDB3/CCS
> 
>            1 WPE1/0/1 Clear (In use)  (EC: MG2)
>            2 WPE1/0/2 Clear (In use)  (EC: MG2)
> 
> ast1:/proc/dahdi# cat 5
> Span 5: WPE1/4 "wanpipe6 card 4" HDB3/CCS
> 
>          125 WPE1/4/1 MTP2 (In use)
>          126 WPE1/4/2 Clear (In use)  (EC: MG2)
> 
> as you can see 1st is a MASTER, but 5th must be, and 5th is not RED.
> 
> 
> and on 1.4.22 - ZAPTEL 1.4.12 (1,2 are RED, so 1st active is used- which is 3rd)
> 
> Span 3: WPE1/2 "wanpipe3 card 2" (MASTER) HDB3/CCS
> 
>           63 WPE1/2/1 Clear (In use)
>           64 WPE1/2/2 Clear (In use)
> 
> Span 5: WPE1/4 "wanpipe5 card 4" HDB3/CCS
> 
>          125 WPE1/4/1 Clear (In use)
>          126 WPE1/4/2 Clear (In use)
> 
> span=3,0,0,ccs,hdb3
> bchan=63-77,79-93
> ...
> span=5,1,3,ccs,hdb3
> bchan=125-155
> 
> 
> 
> 
> Should i report a BUG or I do miss something?

What did you expect here to happen?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir