[asterisk-dev] MASTER CLOCK selection for ZAP/DAHDI span does not work (always 1st active span...)

[Anton VG]

Hello,

Googled everywhere with no luck to get an answer

I've always 1st NOT RED TDM span as master, regardles settings in
DAHDI or ZAPTEL configs:

DAHDI PC (1.6.0.1)

span=5,1,0,ccs,hdb3
bchan=126-155
echocanceller=mg2,126-155
mtp2=125

ast1:/proc/dahdi# cat 1
Span 1: WPE1/0 "wanpipe2 card 0" (MASTER) HDB3/CCS

           1 WPE1/0/1 Clear (In use)  (EC: MG2)
           2 WPE1/0/2 Clear (In use)  (EC: MG2)

ast1:/proc/dahdi# cat 5
Span 5: WPE1/4 "wanpipe6 card 4" HDB3/CCS

         125 WPE1/4/1 MTP2 (In use)
         126 WPE1/4/2 Clear (In use)  (EC: MG2)

as you can see 1st is a MASTER, but 5th must be, and 5th is not RED.


and on 1.4.22 - ZAPTEL 1.4.12 (1,2 are RED, so 1st active is used- which is 3rd)

Span 3: WPE1/2 "wanpipe3 card 2" (MASTER) HDB3/CCS

          63 WPE1/2/1 Clear (In use)
          64 WPE1/2/2 Clear (In use)

Span 5: WPE1/4 "wanpipe5 card 4" HDB3/CCS

         125 WPE1/4/1 Clear (In use)
         126 WPE1/4/2 Clear (In use)

span=3,0,0,ccs,hdb3
bchan=63-77,79-93
...
span=5,1,3,ccs,hdb3
bchan=125-155




Should i report a BUG or I do miss something?