[asterisk-dev] Bristuff ZapBRI in the US [was: Re: BRI support in chan_zap of asterisk 1.6?]

Steve Totaro stotaro at totarotechnologies.com
Thu Mar 6 09:01:07 CST 2008


Tzafrir,

Thanks for that reply.

I do consulting work (my paycheck) so I usually do not give out
complete answers, just enough to either get a determined person to
figure it themselves or send me an email where I try to negotiate some
form of compensation for giving them a working solution.

We come from two different paradigms, I hope you understand.

Anyways, your posting was perfect as far as I am concerned.

Thanks,
Steve Totaro

On Thu, Mar 6, 2008 at 4:06 AM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Wed, Mar 05, 2008 at 07:17:18PM -0500, Steve Totaro wrote:
>
>  > With some very generous help from Tzafrir, I was able to get a quad
>  > port Junghanns card working with a quad port Sangoma FXO card in the
>  > same server with US BRIs.
>
>  As Steve mentioned this, I thought I'll give some relevant technical
>  details.
>
>  The system uses Sangoma 4FXO and a Junghanns quad BRI card. It used a
>  fairly recent version of Zaptel and of the Sangoma drivers. The work
>  there was doen by Steve, and I merely provided some advices at some
>  points.
>
>  The configuration that worked (as I remember it. Configuration of the
>  FXO channels left out for clarity)
>
>  On zaptel.conf:
>
>  # Configure BRI spans as CCS/AMI . Same as in europe.
>  # Value of LBO used there was different , actually.
>  span=1,1,0,ccs,ami
>  span=2,2,0,ccs,ami
>  span=3,3,0,ccs,ami
>  span=4,4,0,ccs,ami
>
>  # The configuration of the channels:
>  # Basically the same, but ulaw seems to be used rather than the driver
>  # of alaw seems to be used there:
>  bchan=1-2
>  dchan=3
>  mulaw=1-2
>
>  bchan=4-5
>  dchan=6
>  mulaw=4-5
>
>  bchan=7-8
>  dchan=9
>  mulaw=7-8
>
>  bchan=10-11
>  dchan=12
>  mulaw=10-11
>
>
>  /etc/asterisk/zapata.conf:
>
>  [channels]
>  ; As you would have expected: BRI, PtP, and National switch-type:
>  switchtype = national
>  signalling = bri_cpe
>
>  ; I think this was used. Not sure:
>  pridialplan = unknown
>  channel => 1-2,4-5,7-8,10-11
>
>  --
>                Tzafrir Cohen
>  icq#16849755              jabber:tzafrir.cohen at xorcom.com
>  +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
>  http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
>  _______________________________________________
>  --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
>  asterisk-dev mailing list
>  To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>



More information about the asterisk-dev mailing list