[asterisk-dev] Navigating Voice Mail

Andre Courchesne - Prival acourchesne at prival.ca
Tue Dec 16 20:12:54 CST 2008


Probably better to move this thread to the user list.

But... Why not simply replace this SPA400 with a real asterisk box which will 
give you all the flexibility. Checkout Asterisk-nox which now is built around 
freePBX.

Andre Courchesne
Concepteur Logiciel - Software Developer acourchesne at prival.ca

PrivalODC Inc.
9955 ave Catania, local 145
Brossard, QC
J4Z 3V5

Web.: http://www.prival.ca
Tel.: (450) 761-9973 poste 635
        1-866-761-9973
Fax.: (450) 761-9842

Ce message électronique ainsi que tous les documents annexés s’adressent
exclusivement à la personne ou à l’entité inscrit dans la rubrique
destinataire ; il peut contenir des renseignements de nature confidentielle
ou privilégiée  aux termes des lois applicables. Nulle autre personne ne
doit y avoir accès.  Si vous n’êtes pas le destinataire convenu, nous vous
avisons par la présente qu'il est strictement interdit d'en divulguer le
contenu, de le distribuer, le copier ou l’ utiliser.  Veuillez aviser
l’expéditeur immédiatement par retour de courrier électronique et supprimer
ce message de votre système.  Toute diffusion ou reproduction de ce document
ainsi que tout mesure prise à l’égard de la présente est formellement
interdite.

Merci de penser à l'environnement avant d'imprimer ce courriel.


Steve Wofford wrote:
> Here's the deal. This is actually a Linksys SPA400 Voice Mail box which is developed on Asterisk 1.0.7.
> 
> I do not have direct access to the code on the box. I can telnet and I get a CLI prompt, but not sure what to do at that point.
> 
> I am able to SUBSCRIBE and get updates for message-summary.
> 
> I guess my question would be, should this direction be avoided and this feature better suited to run on the Asterisk box itself. The problem with this is that I am waiting for Cisco to develop this features and who know if that will even happen. Since it is Asterisk, it is most likely already done, they just need to implement the feature and deploy to their systems.
> 
> Thanks for any input.
> 
> Steve
> 
> -----Original Message-----
> From: asterisk-dev-bounces at lists.digium.com [mailto:asterisk-dev-bounces at lists.digium.com] On Behalf Of Andre Courchesne - Prival
> Sent: Tuesday, December 16, 2008 17:03
> To: Asterisk Developers Mailing List
> Subject: Re: [asterisk-dev] Navigating Voice Mail
> 
> Why go to all this trouble when asterisk already supports voicemail to e-mail?
> Just configure your voicemail.conf correctly and the e-mail with attachement
> will be sent out.
> 
> 
> 
> Andre Courchesne
> Concepteur Logiciel - Software Developer acourchesne at prival.ca
> 
> PrivalODC Inc.
> 9955 ave Catania, local 145
> Brossard, QC
> J4Z 3V5
> 
> Web.: http://www.prival.ca
> Tel.: (450) 761-9973 poste 635
>         1-866-761-9973
> Fax.: (450) 761-9842
> 
> Ce message électronique ainsi que tous les documents annexés s'adressent
> exclusivement à la personne ou à l'entité inscrit dans la rubrique
> destinataire ; il peut contenir des renseignements de nature confidentielle
> ou privilégiée  aux termes des lois applicables. Nulle autre personne ne
> doit y avoir accès.  Si vous n'êtes pas le destinataire convenu, nous vous
> avisons par la présente qu'il est strictement interdit d'en divulguer le
> contenu, de le distribuer, le copier ou l' utiliser.  Veuillez aviser
> l'expéditeur immédiatement par retour de courrier électronique et supprimer
> ce message de votre système.  Toute diffusion ou reproduction de ce document
> ainsi que tout mesure prise à l'égard de la présente est formellement
> interdite.
> 
> Merci de penser à l'environnement avant d'imprimer ce courriel.
> 
> 
> Steve Wofford wrote:
>> Can anyone point me in the direction for navigating Voice Mail based on
>> Asterisk. I am developing a Voice Mail to Email solution. I assume to
>> use the following:
>>
>>
>>
>> 1.       Create a SIP INVITE and use SDP to create an RTP session
>>
>> 2.       Use DTMF to pass users PIN to VM
>>
>> 3.       Enter "1" for new messages
>>
>> 4.       Capture the RTP stream from there on
>>
>> 5.       Encode the RTP to MP3 (or other low bandwidth file type) create
>> the attachment and email.
>>
>>
>>
>> Question: How do I know when a message ends and differentiate between
>> the IVR, new message beginning and ending. I know the prompts are in
>> sound files on the Asterisk box.
>>
>>
>>
>> This is just an overview, having never done this and since there are not
>> books on the subject I am wondering if anyone can point in the right
>> direction.
>>
>>
>>
>> TIA,
>>
>>
>>
>> Steve
>>
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev



More information about the asterisk-dev mailing list