[asterisk-dev] IAX still broken

[Hendrik Visage]

On 10/9/07, Russell Bryant <russell at digium.com> wrote:

> Based on the console output that is in this file, it sounds like this a problem
> that I have seen multiple times.  This appears to happen when the IAX2
> jitterbuffer gets into some kind of bad state, indicated by the jitterbuffer
> messages you see in the log.  There were reports of this against 1.2, as well as
> all versions of 1.4.


see attached typescript output.

> Perhaps if you could get a core dump from the system when it gets into this
> state, it might provide some more insight.  If you do, get the gdb output of
> "thread apply all bt" and "thread apply all bt full".  It would be even more
> helpful if it were possible for you to provide access to the system for someone,
> probably me, to take a look with gdb to try to figure out what happened.
>
> Thanks,
>
> --
> Russell Bryant
> Senior Software Engineer
> Open Source Team Lead
> Digium, Inc.
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>


-- 
Hendrik Visage
-------------- next part --------------
A non-text attachment was scrubbed...
Name: core.19782.script.gz
Type: application/x-gzip
Size: 6710 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-dev/attachments/20071011/4376a1ca/attachment-0002.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: core.26207.script.gz
Type: application/x-gzip
Size: 7806 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-dev/attachments/20071011/4376a1ca/attachment-0003.bin