[asterisk-dev] Config Compaq Proliant DL580 Multi Processors forAstersik

[Alexander Lopez]

This is a Linux issue not an asterisk issue and defiantly NOT a -dev
issue.

 

Please try an applicable mailing list.

 

A few suggestions:

 

Install a different distro, make sure you pick the stock SMP kernel to
test it.

Call Compaq/HP

Run Diagnostics on Server.

 

 

Not a suggestion but a request.

 

Do not answer / reply to this post and have it continue as a thread.
This list is very specific as to the scope of its use and this is WAY
outside that scope....

 

 

 

 

________________________________

From: asterisk-dev-bounces at lists.digium.com
[mailto:asterisk-dev-bounces at lists.digium.com] On Behalf Of Ping Liu
Sent: Tuesday, May 01, 2007 9:14 PM
To: asterisk-dev at lists.digium.com
Subject: [asterisk-dev] Config Compaq Proliant DL580 Multi Processors
forAstersik

 

We have Compaq Proliant DL580 server with  4 processors. The Asterisk we
have on this system is Asterisk 1.2.13.

 

This OS we have is Linux with Kernel 2.6.9 and SMP configured.

 

System can see that were 4 processors, but only one CPU has been used:

 

CPU0             CPU1            CPU2              CPU3       

  0:                426675508                      0
0                      0          XT-PIC  timer

  1:                                   8                      0
0                      0          XT-PIC  i8042

  2:                                   0                      0
0                      0          XT-PIC  cascade

  3:                426689123                       0
0                      0          XT-PIC  wanpipe1

  5:                     2072601                       0
0                      0          XT-PIC  ida0

  8:                                   1                       0
0                      0          XT-PIC  rtc

 14:                    3836735                       0
0                       0          XT-PIC  ide0

 15:                  51600792                       0
0                       0          XT-PIC  eth0

NMI:                               0                       0
0                      0 

LOC:              426758689   426758707    426758706    426758705 

ERR:          0

MIS:          0

 

Can anyone help for getting 4 CPU to be used.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20070501/18ef06c4/attachment.htm