[asterisk-dev] using Hardware TDM switch

[Khelik Mikhail]

For this you should only correctly realize callback function which
will drive the hardware switch in your low-level driver and pass
pointer during the span registration, look into (*dacs) in the zt_span
structure.

2006/9/18, M Desai <mdesai_1970 at yahoo.com>:
>
>
> I am trying out an old HW card which has one T1/E1 line, 8 POTS ports (4 FXO
> and 4 FXS) and a IDT TSI.I am trying to hack Zaptel to use the HW TSI so
> that only the signaling needs to be done in SW  and the TDM channels for
> data will be handled in HW.
>
> Looks like I need only to change Zaptel to achieve this. Any advise on this
> from the gurus out there ? Is this feasible ?
>
> Also looks like the Octasic code attempts something along these lines but I
> presume the TDM switch is inside the Octasic 6100 can be used only to switch
> TDM channels inside the Echo canceller.
>
>
>
> M Desai
>
>
> ________________________________
> How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call rates.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>
>