[asterisk-dev] Change to PRI called number presentation length between 1.2.10 and 1.2.11?

[Steve Hanselman]

Hi, we have 3 digit PRI presentation, in 1.2.10 all worked fine, as of
1.2.11 we now have to have 4 digit mapping:
 
Just had a quick search on Mantis and I can't find anything obvious, is
this by design or a bug?
 
Here's the relevant debug that highlights the issue:-
 
Called number is 111, in the call later we see it as 0111
 
dell*CLI> pri debug span 1
Enabled debugging on span 1
1 < Protocol Discriminator: Q.931 (8)  len=37
1 < Call Ref: len= 2 (reference 4557/0x11CD) (Originator)
1 < Message type: SETUP (5)
1 < [1 041  031  801  901  a31 ]
1 < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Speech (0)
1 <                              Ext: 1  Trans mode/rate: 64kbps,
circuit-mode (16)
1 <                              Ext: 1  User information layer 1: A-Law
(35)
1 < [1 181  031  a11  831  831 ]
1 < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
Preferred Dchan: 0
1 <                        ChanSel: Reserved
1 <                       Ext: 1  Coding: 0   Number Specified   Channel
Type: 3
1 <                       Ext: 1  Channel: 3 ]
1 < [1 6c1  0d1  011  831  301  371  391  371  331  371  351  301  391
391  331 ]
1 < Calling Number (len=15) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
1 <                           Presentation: Presentation allowed of
network provided number (3) '07973750993' ]
1 < [1 701  041  a11  311  311  311 ]
1 < Called Number (len= 6) [ Ext: 1  TON: National Number (2)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '111' ]
1 < [1 a11 ]
1 < Sending Complete (len= 1)
1 -- Making new call for cr 4557
1 -- Processing Q.931 Call Setup
1 -- Processing IE 4 (cs0, Bearer Capability)
1 -- Processing IE 24 (cs0, Channel Identification)
1 -- Processing IE 108 (cs0, Calling Party Number)
1 -- Processing IE 112 (cs0, Called Party Number)
1 -- Processing IE 161 (cs0, Sending Complete)
1 > Protocol Discriminator: Q.931 (8)  len=10
1 > Call Ref: len= 2 (reference 4557/0x11CD) (Terminator)
1 > Message type: CALL PROCEEDING (2)
1 > [1 181  031  a91  831  831 ]
1 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
Exclusive Dchan: 0
1 >                        ChanSel: Reserved
1 >                       Ext: 1  Coding: 0   Number Specified   Channel
Type: 3
1 >                       Ext: 1  Channel: 3 ]
    -- Accepting voice call from '07973750993' to '0111' on channel 0/3,
span 1
    -- Executing SetCallerPres("Zap/3-1", "allowed") in new stack
    -- Executing Set("Zap/3-1",
"CALLFILENAME=20060907-083615-Inbound-07973750993-0111") in new stack
    -- Executing Monitor("Zap/3-1",
"wav|20060907-083615-Inbound-07973750993-0111|m") in new stack
    -- Executing Dial("Zap/3-1", "Zap/g2/0111w") in new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called g2/0111w
    -- Zap/32-1 is proceeding passing it to Zap/3-1
    -- Zap/32-1 is ringing



The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20060907/85abdeb1/attachment.htm