[asterisk-dev] RDNIS not set on diverted incoming calls?

[Roy Sigurd Karlsbakk]

hi all

when diverting a call from some phone to a number connected to my *  
box, * does not decode  the incoming RDNIS. PRI debug shows the  
number, but only as hex. Is this meant to be this way?

thanks

roy

PRI DEBUG:
< Protocol Discriminator: Q.931 (8)  len=77
< Call Ref: len= 2 (reference 5568/0x15C0) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a3]
< Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer  
capability: Speech (0)
<                              Ext: 1  Trans mode/rate: 64kbps,  
circuit-mode (16)
<                              Ext: 1  User information layer 1: A- 
Law (35)
< [18 03 a1 83 81]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,  
Preferred Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified    
Channel Type: 3
<                       Ext: 1  Channel: 1 ]
< [1c 24 91 a1 21 02 01 25 02 01 0f 30 19 02 01 01 0a 01 01 a1 11 a0  
0f a1 0d 0a 01 00 12 08 34 38 38 36 39 34 34 30]
< Facility (len=38, codeset=0) [ 0x91, 0xa1, 0x21, 0x02, 0x01, 0x25,  
0x02, 0x01, 0x0f, '0', 0x19, 0x02, 0x01, 0x01, 0x0a, 0x01, 0x01,  
0xa1, 0x11, 0xa0, 0x0f, 0xa1, 0x0d, 0x0a, 0x01, 0x00, 0x12, 0x08,  
'48869440' ]
< [6c 0a 21 83 39 38 30 31 33 33 35 36]
< Calling Number (len=12) [ Ext: 0  TON: National Number (2)  NPI:  
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
<                           Presentation: Presentation allowed of  
network provided number (3) '98013356' ]
< [70 09 a1 32 31 39 37 33 35 39 39]
< Called Number (len=11) [ Ext: 1  TON: National Number (2)  NPI:  
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '21973599' ]
< [a1]*CLI>

--
Roy Sigurd Karlsbakk
roy at karlsbakk.net
-------------------------------
MICROSOFT: Acronym for "Most Intelligent Customers Realise Our  
Software Only Fools Teenagers"