[asterisk-dev] UK CallerID on TMD400 card

[Rich Adamson]

Steve Kennedy wrote:
> On Tue, Mar 21, 2006 at 02:07:50PM -0600, Rich Adamson wrote:
> 
>>> This definately seems broken.
>>> Using a TDM400 and Zap channels with phones plugged in, when dialing a
>>> phone it errors with "CallerID Spill" or similar. It works fine with US
>>> CallerID using US phones, but unfortunately this isn't an option as it's
>>> on a UK site and strangely they have UK phones.
>>> This definately looks like a bug ...
>> Have you looked at asterisk/configs/zapta.conf.sample:
>> ; Whether or not to use caller ID
>> ;
>> usecallerid=yes
>> ;
>> ; Type of caller ID signalling in use
>> ;     bell     = bell202 as used in US
>> ;     v23      = v23 as used in the UK
>> ;     v23_jp   = v23 as used in Japan
>> ;     dtmf     = DTMF as used in Denmark, Sweden and Netherlands
>> ;     smdi     = Use SMDI for callerid.  Requires SMDI to be enabled 
>> (usesmdi).
>> ;
>> ;cidsignalling=bell
>> ;
>> ; What signals the start of caller ID
>> ;     ring     = a ring signals the start
>> ;     polarity = polarity reversal signals the start
>> ;
>> ;cidstart=ring
>> Not sure if this applies only to incoming fxo lines, or if it can be 
>> used with fxs ports as well.
> 
> Yup, but it's definately broken. the "spill" problem is something wrong
> in the zap drivers I think (i.e. it's not completing the CallerID stuff
> before something times out). Anyway it doesn't work for UK CallerID.
> 
> As a Digium supported product, I'd call it serious.

Open a bug on the bug tracker. Probably won't get fixed with it.