[asterisk-dev] UK CallerID on TMD400 card

[Rich Adamson]

> This definately seems broken.
> 
> Using a TDM400 and Zap channels with phones plugged in, when dialing a
> phone it errors with "CallerID Spill" or similar. It works fine with US
> CallerID using US phones, but unfortunately this isn't an option as it's
> on a UK site and strangely they have UK phones.
> 
> This definately looks like a bug ...

Have you looked at asterisk/configs/zapta.conf.sample:

; Whether or not to use caller ID
;
usecallerid=yes
;
; Type of caller ID signalling in use
;     bell     = bell202 as used in US
;     v23      = v23 as used in the UK
;     v23_jp   = v23 as used in Japan
;     dtmf     = DTMF as used in Denmark, Sweden and Netherlands
;     smdi     = Use SMDI for callerid.  Requires SMDI to be enabled 
(usesmdi).
;
;cidsignalling=bell
;
; What signals the start of caller ID
;     ring     = a ring signals the start
;     polarity = polarity reversal signals the start
;
;cidstart=ring

Not sure if this applies only to incoming fxo lines, or if it can be 
used with fxs ports as well.