[asterisk-dev] Zap channels Deactivated with Bristuff-0.3.x after upgrade from 0.2.0

[Zoa]

This mailinglist is for asterisk related development discussions, not 
for third party support questions.

Zoa.

Olivier MONNET wrote:

> Hello,
> I've tried to send it to asterisk-users, but I have received no  
> answers so I'm trying here.
>
> I have about 10 Asterisk PBX in production with Bristuff-0.2.0-RC8q  
> (asterisk 1.0.10) and I want to use Bristuff-0.3 now for the new PBX  
> I am going to set up.
> With Bristuff-0.2.0-RC8q the ISDN lines are working fine, but the new  
> version of Asterisk add some nice features.
> All these PBX are in France with France Telecom lines.
> When I use the new version after about an hour with Euronumeris lines  
> and almost instantly with Euronuméris+ line, TE lines goes  
> Deactivated in /proc/zaptel/:
>
> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED  
> (F7)" AMI/CCS
>
>            1 ZTHFC1/0/1 Clear (In use)
>            2 ZTHFC1/0/2 Clear (In use)
>            3 ZTHFC1/0/3 HDLCFCS (In use)
>
> I have tested almost all the possible settings for /etc/zaptel.conf  
> and /etc/asterisk/zapata.conf
> There is no IRQ sharing for the HFC-PCI cards.
>
> When cards are deactivated, I can receive calls, but not make call.
> The cards in NT mode seems to work fine (connected to an Alcatel PBX).
> All the cards are 1 port HFC-PCI cards. I also have an 8 ports card  
> from Junghanns.net but this card is on a production server and it's  
> hard to use it for test.
>
> Almost all the PBX are on Centos 3.4 with kernel  2.4.21 and I'm  
> using the patch from http://zaphfc.florz.dyndns.org/.
>
> Does someone have this problem to?
>
> I can post the configuration files if it can help.
>
> Best regards
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev