[asterisk-dev] zaptel 1.2.6 and 1.2.8 dtmf detection problem

Benoît Mérouze benoit.merouze at ipercom.com
Wed Aug 30 06:56:13 MST 2006


Kevin P. Fleming wrote:
> ----- Ma Zhiyong <zhiyong.m at gmail.com> wrote:
>   
>> I search the source code.
>> in 1.2.6.wct4xxp.c , vpmdtmfsupport=1
>> in 1.2.8.wct4xxp_base.c: vpmdtmfsupport = 0;
>>
>> I think 1.2.6 use hardware to detect DTMF and 1.2.8 use software do
>> DTMF detection. Don't they?
>>     
>
> This change was made when the VPM450M (part of the TE407P/TE412P cards) was released, because it's hardware DTMF detector is not yet usable. Unfortunately this also turned off hardware DTMF detection for the older VPM400M (TE406P/TE411P) cards. You can safely turn it back on for your system.
>
>   

Does that mean the TE407P/TE412P cards do not support DTMF at the moment ?
Could that be the same with the TE405P/TE410P cards ?  And with the TE2XXP ?


-- 
Benoît Mérouze
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._.
 Groupe IPercom - The VoIP Enabling Company -  http://www.ipercom.com
         Ingénieur R&D - courriel : benoit.merouze at ipercom.com
     Network Software Developer - mailto: benoit.merouze at ipercom.com
                     Tél. / Phone : +33 1 7269 9611
._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._
Siège Social 43, rue Fessart 92100 Boulogne Billancourt
RCS NANTERRE B 440 345 528 - Capital social: 100 000 €
CE COURRIEL COMME LES DOCUMENTS EVENTUELLEMENT ASSOCIES
SONT CONFIDENTIELS & COUVERTS PAR LE SECRET PROFESSIONNEL

THIS E MAIL AND ANY DOCUMENT POSSIBLY ATTACHED ARE
CONFIDENTIAL AND COVERED BY THE PROFESSIONAL SECRECY
._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._
"Those who would give up Essential Liberty to purchase a little
  Temporary Safety, deserve neither Liberty nor Safety."
Benjamin Franklin




More information about the asterisk-dev mailing list