[asterisk-dev] Zaptel DTMF Problem?

[Wai Wu]

I hate to bring this up again. I got it working; but only after I put in
vpmsupport=0 when loading the module wct4xxp (My card is TE411P and I
saw your message in the users' mailing list). That parameter in effect
down graded the card as well. I am using the zaptel driver from the CVS
HEAD.

-----Original Message-----
From: asterisk-dev-bounces at lists.digium.com
[mailto:asterisk-dev-bounces at lists.digium.com] On Behalf Of Kevin P.
Fleming
Sent: Tuesday, April 25, 2006 11:57 AM
To: Asterisk Developers Mailing List
Subject: Re: [asterisk-dev] Zaptel DTMF Problem?

Wai Wu wrote:

> When this command is sent to asterisk, it dials out to my phone (Zap/1
is trunk 1 on my pri). When I pickup the phone, I heard the demo
message. However, when I start pressing the digits on the phone, nothing
happens. This problem does not occure when I call into asterisk from my
phone. I don't this is a hardware or configuration issue.

I understood that was your problem from the beginning. This bug was
already fixed months ago, and if you are still experiencing it, then
there is is some other cause. That is why I suggested you contact Digium
Support and allow them to help you determine what the root cause is.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev