[Asterisk-Dev] problem receiveing fax whit capi

[Armin Schindler]

Hi,

I cannot see any problem or error, the log just stops.
I will try to reproduce the problem, but can you test this with
new version 0.6?

Armin

On Thu, 22 Sep 2005, roberto.ziano wrote:
> This is the set verbose 5 / capi debug before the soekriss shutdown
> 
> Roby.
> 
> 
> CONNECT_IND ID=001 #0x04a9 LEN=0047
>   Controller/PLCI/NCCI            = 0x101
>   CIPValue                        = 0x4
>   CalledPartyNumber               = <a1>238101310
>   CallingPartyNumber              = <21 83>461420833
>   CalledPartySubaddress           = default
>   CallingPartySubaddress          = default
>   BC                              = <90 90 a3>
>   LLC                             = default
>   HLC                             = default
>   AdditionalInfo                  = default
> 
>   == CONNECT_IND
> (PLCI=0x101,DID=238101310,CID=461420833,CIP=0x4,CONTROLLER=0x1)
>     -- creating pipe for PLCI=0x101
> ALERT_REQ ID=001 #0x04a9 LEN=0017
>   Controller/PLCI/NCCI            = 0x101
>   AdditionalInfo
>    BChannelinformation            = default
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
> 
>     -- started pbx on channel (callgroup=1)!
> INFO_IND ID=001 #0x04aa LEN=0017
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x1e
>   InfoElement                     = <80 83>
> 
> INFO_RESP ID=001 #0x04aa LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>   == info element PI 80 83
>  Origination is non ISDN
> INFO_IND ID=001 #0x04ab LEN=0025
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x70
>   InfoElement                     = <a1>238101310
> 
> INFO_RESP ID=001 #0x04ab LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>   == info element CALLED PARTY NUMBER
>        > INFO_IND DID digits in non PtP mode
> INFO_IND ID=001 #0x04ac LEN=0016
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x18
>   InfoElement                     = <89>
> 
> INFO_RESP ID=001 #0x04ac LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>   == info element CHANNEL IDENTIFIKATION 89
> ALERT_CONF ID=001 #0x04a9 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Info                            = 0x0
> 
>   == Starting CAPI/contr1/238101310-5 at enter,238101310,1 failed so
> falling back to exten 's'
>     -- Executing Dial("CAPI/contr1/238101310-5", "SIP/gs1|20|Ttr") in
> new stack   -- Called gs1
>   == Requested RINGING-Indication for CAPI/contr1/238101310-5
>     -- SIP/gs1-0901 is ringing
>     -- Nobody picked up in 20000 ms
>   == Requested Indication-STOP for CAPI/contr1/238101310-5
>     -- Executing Goto("CAPI/contr1/238101310-5", "handle_fax|s|1") in
> new stack   -- Goto (handle_fax,s,1)
>     -- Executing capiAnswerFax("CAPI/contr1/238101310-5",
> "/mnt/kd/fax-336461573.10") in new stack
>     -- CAPI Answering in fax mode for MSN 238101310
> CONNECT_RESP ID=001 #0x04a9 LEN=0071
>   Controller/PLCI/NCCI            = 0x101
>   Reject                          = 0x0
>   BProtocol
>    B1protocol                     = 0x4
>    B2protocol                     = 0x4
>    B3protocol                     = 0x4
>    B1configuration                = default
>    B2configuration                = default
>    B3configuration                = <00 00 00 00 08>00000000<0e>CAPI
> FAXServer
>   ConnectedNumber                 = <00 80>238101310
>   ConnectedSubaddress             = default
>   LLC                             = default
>   AdditionalInfo
>    BChannelinformation            = default
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
> 
> CONNECT_ACTIVE_IND ID=001 #0x04ad LEN=0015
>   Controller/PLCI/NCCI            = 0x101
>   ConnectedNumber                 = default
>   ConnectedSubaddress             = default
>   LLC                             = default
> 
> CONNECT_ACTIVE_RESP ID=001 #0x04ad LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
> CONNECT_B3_IND ID=001 #0x04ae LEN=0037
>   Controller/PLCI/NCCI            = 0x10101
>   NCPI                            = <40>8<00 00 00 00 00 00 0f 2b>39
> 0461 421157
> 
> CONNECT_B3_RESP ID=001 #0x04ae LEN=0015
>   Controller/PLCI/NCCI            = 0x10101
>   Reject                          = 0x0
>   NCPI                            = default
> 
> CONNECT_B3_ACTIVE_IND ID=001 #0x04af LEN=0037
>   Controller/PLCI/NCCI            = 0x10101
>   NCPI                            = <40>8<00 00 00 00 00 00 0f 2b>39
> 0461 421157
> 
> CONNECT_B3_ACTIVE_RESP ID=001 #0x04af LEN=0012
>   Controller/PLCI/NCCI            = 0x10101
> 
> pbx*CLI>
> 
> 
> 
> 
> On Thu, 2005-09-22 at 11:06 +0200, Armin Schindler wrote:
> > On Thu, 22 Sep 2005, roberto.ziano wrote:
> > > Hallo everybody,
> > > 
> > > my system is a soekris 4801 whit a fritzcard PCI
> > > 
> > > - the OS is Astlinux 0.2.8
> > > - Asrterisk CVS-HEAD-01/10/05-02:11:15-AstLinux
> > > - capi driver dowloaded from sourceforge.net (chan_capi-cm-0.5.4)
> > > 
> > > All is work but receiveing fax.
> > > When a fax arrives, the system answers and begins to receice, during the
> > > receive operation it hangups.
> > 
> > What commands (in extensions.conf) did you use? Can you provide a debug log 
> > (set verbose 5 / capi debug)?
> > 
> > Maybe you also want to try the new version chan_capi-cm-0.6.
> > 
> > Armin
> > 
>