[Asterisk-Dev] Dual Span T1

[steve at daviesfam.org]

On Tue, 13 Sep 2005, Ricky Keele wrote:

> I have the capability to make the line signaling anything I wish, I have
> control of the Telco side of the T1/PRI but there were never any suggestions
> to make any changes concerning the signaling of the line. I have tried every
> configuration possible for the Telco side of this line. This same box has
> been running a single span T1 card 110P since I put it into service using
> PRI signaling. The trouble started with the Dual T1 card 2xxp. I have three
> of these servers running the single span 110P using PRI signaling. I
> returned the card after being told that it was defective. Replaced the card
> with another card got the same results. Best guess was that the PCI slot
> riser was causing the problem, so back to my original question; has anyone
> used the Dual Span T1 in a 1U rack mount server that uses a riser to connect
> the PCI card to the motherboard.


Yes - we have a TE210P in a customer machine running solidly.  Intel 1U 
server with a riser card.  Is it called a Torrey Pines?  I always get 
confused about the names.  (I will find out on Friday if you write to me 
privately).

Steve