[Asterisk-Dev] Please accept this patch to wcfxo.c to identify itself with debug set .

[Mr. James W. Laferriere]

	Hello Tzafrir ,

On Sun, 30 Oct 2005, Tzafrir Cohen wrote:
> On Sat, Oct 29, 2005 at 08:22:24AM -0600, Mr. James W. Laferriere wrote:
> > 	Hello All ,  Please accept this patch to wcfxo.c to identify itself 
> > 	with debug set at modprobe .  Hth ,  JimL
> > 
> > ie: from /etc/modprobe.conf
> > 
> > install wcfxo /sbin/modprobe --ignore-install wcfxo debug=1 && /sbin/ztcfg -vv -d9
> Regardless of the patch (snipped from this reply), could you please
> explain what is the point of the above complex line?
> 
> It will fail if you have a slightly more complex zaptel configuration,
> which is why I rather run ztcfg in a separate init.d script and not get
> strange "modprobe failures". But then again:
> 
> install wcfxo /sbin/ztcfg -vv -d9
> 
> seems rather equivalent.
> 
> And obviously: modprobe.conf is 2.6-specific.
	Do not have the foggiest of an idea what Asterisk developers had in mind 
	with that line .  Fyi ,  This is from a recent cvs pull & those lines 
	straight from the install procedure ,  all I did was add the debugging .
	Please ask one of the developers about the reasoning .
	Btw ,  Thank you for the idea of seperating out the two commands .
		Twyl ,  JimL
-- 
+------------------------------------------------------------------+
| James   W.   Laferriere | System    Techniques | Give me VMS     |
| Network        Engineer | 3542 Broken Yoke Dr. |  Give me Linux  |
| babydr at baby-dragons.com | Billings , MT. 59105 |   only  on  AXP |
+------------------------------------------------------------------+