[Asterisk-Dev] New Bounty add Flash hook support to E&M channel $1000.00 US

[Andrew Edem]

Call Jim Dixon: +1.619.667.3833

He's sitting across from me right now and says he'll do it if you call
him.

He wrote that part of the driver code anyway.

-Andrew

On Mon, May 23, 2005 at 08:22:33PM -0400, Ronald Hartmann wrote:
> http://www.voip-info.org/wiki-Asterisk+bounty+E+and+M+FlashHook+support
> 
> Asterisk bounty E and M FlashHook support 
> 
> Requirements 
> 
> BOUNTY of $1000.00 US to be paid providing the following guidelines are
> met. 
> 
> DEADLINE to having this for testing is May 31st 2005 12:00 PM EST. 
> If additional time is needed we can discuss an extension. 
> 
> 
> 1. Add Flash hook capabilities to the Asterisk E&M channel which does
> not currently support FLASH-HOOK when running with Feature Group D. 
> 
> I need to have FLASH HOOK ability added to this channel to enable my
> asterisk box to appropriately interact with 
> with an analog channel bank, and thus allow the channel bank to Blind
> transfer calls by passing "FLASH"<EXTEN> then hanging  up. 
> 
> Following is an example of what i am trying to accomplish. 
> 
> 
> 
> I?am?interested?in?your?Quad?T1/PRI?Card. 
> 
> I?have?a?requirement?where?I?must?connect?the?card?as?follows 
> 
> PRI-1------(from Telco)-----------> | | 
> ??????????????????????????????????????????|?Asterisk?PBX?|? 
> PRI-2------(from Telco)----------> | | 
> ?????????????????????????????????????????????????| 
> ?????????????????????????????????????????????????| 
> ????????????????????????????????????????????(PRI-3?E&M) 
> ?????????????????????????????????????????????????| 
> ???????????????????????????????????????????(Feature?Group?D) 
> ?????????????????????????????????????????????????| 
> ????????????????????????????????????????????(Adtran?TA624)? 
> 
> 
> 
> I need to pass the incoming ANI/DNIS Info arriving from the Telco into
> the asterisk box on Spans 1 and 2, to the Adtran TA624 Connected to
> Span-3. 
> This should be accomplishable by enabling Feature Group D as the
> signaling for asterisk. 
> The Adtran will pass this information to the analog device between rings
> 1 and 2. 
> 
> 
> The analog devices will perform some IVR functions, and then will issue
> a Flash Hook followed by an extension number to transfer the 
> call to an available agent to assist the caller further. 
> 
> 
> 2) The code should work with the latest CVS version of Asterisk, Both
> Stable and HEAD. 
> 
> 3) Disclaim the code (for potential inclusion in the Asterisk CVS) as
> described at http://bugs.digium.com, and post the code at
> http://bugs.digium.com. 
>  
> 
> 
> 
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev