[Asterisk-Dev] New Bounty add Flash hook support to E&M channel $1000.00 US

[Ronald Hartmann]

http://www.voip-info.org/wiki-Asterisk+bounty+E+and+M+FlashHook+support

Asterisk bounty E and M FlashHook support 

Requirements 

BOUNTY of $1000.00 US to be paid providing the following guidelines are
met. 

DEADLINE to having this for testing is May 31st 2005 12:00 PM EST. 
If additional time is needed we can discuss an extension. 


1. Add Flash hook capabilities to the Asterisk E&M channel which does
not currently support FLASH-HOOK when running with Feature Group D. 

I need to have FLASH HOOK ability added to this channel to enable my
asterisk box to appropriately interact with 
with an analog channel bank, and thus allow the channel bank to Blind
transfer calls by passing "FLASH"<EXTEN> then hanging  up. 

Following is an example of what i am trying to accomplish. 



I am interested in your Quad T1/PRI Card. 

I have a requirement where I must connect the card as follows 

PRI-1------(from Telco)-----------> | | 
                                          | Asterisk PBX |  
PRI-2------(from Telco)----------> | | 
                                                 | 
                                                 | 
                                            (PRI-3 E&M) 
                                                 | 
                                           (Feature Group D) 
                                                 | 
                                            (Adtran TA624)  



I need to pass the incoming ANI/DNIS Info arriving from the Telco into
the asterisk box on Spans 1 and 2, to the Adtran TA624 Connected to
Span-3. 
This should be accomplishable by enabling Feature Group D as the
signaling for asterisk. 
The Adtran will pass this information to the analog device between rings
1 and 2. 


The analog devices will perform some IVR functions, and then will issue
a Flash Hook followed by an extension number to transfer the 
call to an available agent to assist the caller further. 


2) The code should work with the latest CVS version of Asterisk, Both
Stable and HEAD. 

3) Disclaim the code (for potential inclusion in the Asterisk CVS) as
described at http://bugs.digium.com, and post the code at
http://bugs.digium.com.