[Asterisk-Dev] DMS-500 CID name not in CDR

Steven critch at basesys.com
Fri Jun 10 20:59:35 MST 2005

On Fri, 2005-06-10 at 17:05 -0400, jr.richardson at cox.net wrote:
> Hi Guys,
> I have several * servers connected to T1 PRI's from various service
> providers in multiple locations the US.  All the * servers use the
> same hardware with the same OS and * version.  When connected to 5ESS
> Switches, using the NI2 (national) PRI protocol, the CID name and
> number come across fine and populate into the * CDR fine.  I connected
> to a DMS-500, NI2 (national) protocol and the CID name doesn't get
> populated in the * CDR.  The only variance in the PRI debug outputs is
> this, from the DMS switch:

My guess is you aren't receiving CID when the call is answered. On the
DMS-500 connected machines, put a wait(1) in the extensions before you
answer or forward on the call and you should get the CID.
Steven <critch at basesys.com>

More information about the asterisk-dev mailing list