[Asterisk-Dev] Disabling native bridging altogether?

[Gary]

why not simply if extension busy go play a message and wait 30 seconds
and jump back to ring again, if busy ......


On Thu, 21 Jul 2005 14:35:09 -0700, Peter Hsu wrote:

>Thanks for the response.
>
>Essentially, I want asterisk to pause execution of the dialplan until after 
>the called party hangs up.
>
>It seems if the native bridging occurs, execution of the diaplan continues 
>immediately.
>
>Maybe I'm barking up the wrong tree?
>
>Thanks,
>Peter Hsu
>
>----- Original Message ----- 
>From: "Kevin P. Fleming" <kpfleming at digium.com>
>To: "Asterisk Developers Mailing List" <asterisk-dev at lists.digium.com>
>Sent: Thursday, July 21, 2005 1:40 PM
>Subject: Re: [Asterisk-Dev] Disabling native bridging altogether?
>
>
>> Peter Hsu wrote:
>>> My asterisk server seems to be sporadically attempting native transfers 
>>> when I don't expect it to.  I've set notransfer=yes in my iax.conf both 
>>> in the general section and for each of my outgoing peers.  I also include 
>>> the t, T, and L(some int > 0) tags when doing the transfer.
>>
>> You are confusing native bridging and native transfers (which are one step 
>> below).
>>
>> Native bridging means it allows the channel driver (chan_iax2 in this 
>> case) to handle the audio bridging, rather than sending the audio up the 
>> stack into the res_features bridge. This is more efficient, and using 'Tt' 
>> will not stop it, since chan_iax2 can bridge the audio and still stop 
>> bridging when DTMF arrives, since DTMF is always out of band in IAX2.
>>
>> Native transfers are something else entirely (IAX2 specific), and control 
>> what will happen when one IAX2 peer calls another _through_ your box. If 
>> "notransfer" is not set, then your box will drop out of the path, and 
>> allow the two IAX2 peers to talk directly to each other.
>>
>>>    -- Stopped music on hold on Local/test at outgoing-2
>>>    -- Attempting native bridge of IAX2/Gafachi-out/2 and 
>>> IAX2/Gafachi-out/1
>>
>> Why don't you start by describing why you think you need to keep this 
>> native bridge from happening, instead of finding ways to mangle the code 
>> involved...
>> _______________________________________________
>> Asterisk-Dev mailing list
>> Asterisk-Dev at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-dev
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>> 
>
>_______________________________________________
>Asterisk-Dev mailing list
>Asterisk-Dev at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-dev
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev

.