[Asterisk-Dev] Help IP phone project

[Mark Aiken]

You might want to have a look at the sipfoundry stuff for a single
line IP phone. There is a rather large well developed SIP phone
(sipXphone) and a lighter, newer SIP phone project (can recall the
name) as well.

On 8/20/05, Prakash N <np_0 at yahoo.co.in> wrote:
> Hi 
> Iam Prakash doing my project in Design and development of Low cost IP-Phone.
> Iam planning to use single channel IP phone with minimal features. 
> Low cost is by using single processor approach (no DSP chip and only RISC
> Processor) which is avaliable open source. The chipset Iam planning 
> contains ADC/DAC, LCD interface etc as the normal IP phone chipsets 
> have except the processor which doesnt account in BOM. 
>   
> The software part Iam planning to use Asterik which is freely available. I
> want 
> to know whether the software (open source) does/could be supported for my
> hardware. As Iam not using the commercially available boards, the question
> comes. My plan is first compile the software (Asterisk) into the RISC
> processor and evaluate the performace of the processor and then optimize my
> processor for best performance. 
> Is this project viable / Do I've a any loop hole in this approach. 
> Please provide your valuable comments/help regarding this. 
>   
> As this is the student project for my ME degree I'm trying to use simple but
> complete one working chipset. 
>   
> Regards 
> Prakash 
> ME-MicroElectronics 
> Indian Institute of Science 
> Bangalore 
> India
> 
>  ________________________________
> Check out Yahoo! India Rakhi Special for Rakhi shopping, contests and lots
> more. 
>  http://in.promos.yahoo.com/rakhi/index.html 
> 
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 
>