[Asterisk-Dev] MeetMe with SMP and no USB

[Michael Bielicki]

try zaprtc from bri-stuff from www.junghanns.net. Works fine with dual xeons


On Wed, 8 Sep 2004 10:26:48 -0500, Tilghman Lesher
<tilghman at mail.jeffandtilghman.com> wrote:
> On Wednesday 08 September 2004 10:03, Matthew Boehm wrote:
> > That's a $100 card and I'd really rather not add more hardware to this
> > machine. It might not even have an open slot for it. If it does, does
> > anything need to be plugged into the card to use it for MeetMe or can it
> > work without anything.
> >
> > This seemed more like a dev issue since I'm dealing with source code,
> > timers, and hardware.
> 
> The MeetMe app requires a 1000Hz clock for timing.  This is the timing within
> the Zaptel hardware.  The UHCI USB interface can be made to provide this, as
> it also generates a 1000Hz clock signal.  While there are other sources of
> timing available, they are either not available or they do not provide a
> perfect 1000Hz timing source.
> 
> You're certainly welcome to moan and complain (preferably off list) for $100
> worth of your time, but it isn't going to do any good, and with that $100, you
> could have saved it and plunked it down for an X100P.
> 
> --
> Tilghman
> 
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 



-- 
Michael Bielicki