[Asterisk-Dev] Where to get 48 volt Power Supplies for Cisco IP Phones

[Jennifer Archer]

It would probally be a better place for the discussion, but hence it was
started here, i thought I would put my two bits in...

Sincerely,


Steve McMahon
Digital DataBits Innovations
Salem, OR  97301
----- Original Message ----- 
From: "Scott Stingel" <scott at evtmedia.com>
To: <asterisk-dev at lists.digium.com>
Sent: Wednesday, May 12, 2004 8:25 AM
Subject: RE: [Asterisk-Dev] Where to get 48 volt Power Supplies for Cisco IP
Phones


>
> Wouldn't the Asterisk-Users section be more appropriate for discussions of
> this type??
>
> Cheers!
>
>
>
> Scott M. Stingel
> President,
> Emerging Voice Technology, Inc.
> Palo Alto California & London England
> www.evtmedia.com
>
> -----Original Message-----
> From: asterisk-dev-admin at lists.digium.com
> [mailto:asterisk-dev-admin at lists.digium.com] On Behalf Of Terence Parker
> Sent: Wednesday, May 12, 2004 7:38 AM
> To: asterisk-dev at lists.digium.com
> Subject: Re: [Asterisk-Dev] Where to get 48 volt Power Supplies for Cisco
IP
> Phones
>
> That's a good point - I hadn't really considered POE for some reason. We
> have a few of the official Cisco POE's for travel purposes, but other than
> that we're just using our 48v convertor.
>
> Just out of interest - what happens when you plug a POE enabled switch
into
> a non-POE IP phone, as some of our are? Would this fry the phone? I also
> assume that a POE switch costs quite a bit more than a standard switch?
>
> Certainly well worth considering though to avoid the hassle of laying
> separate cables.....
>
> Now if only IP phone manufacturers would all stick to the standards and
use
> 48V for their power requirements.
>
> - Terence
>
>
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>