[Asterisk-Dev] 12SP 30VIP Cisco Phone Questions!!

[Jennifer Archer]

Ok! taking apart the Cisco 12sp/30Vip Phones, there is a 10 pin block, named
"Debug Port" the other, goes to the Keypad/LCD module, But there is a debug
port not beeing used, with 10 pins! How or does anyone want to figure out
what this is? It could be a serial type of interface maybe? I dont know how
to figure that out, (I am not a electronics smartie) Just wanted to know if
anyone would know the pinout or want to try to figure it out!

Sincerely,


Steve McMahon
Digital DataBits Innovations
Salem, OR  97301
Office:   (503)371-6448 Ext. 2
Cellular: (503)881-6828
----- Original Message ----- 
From: "Jan Czmok" <czmok at gatel.net>
To: <asterisk-dev at lists.digium.com>
Sent: Sunday, May 09, 2004 3:39 PM
Subject: Re: [Asterisk-Dev] SEPDefault.cnf for 12SP/30VIP Discoveries


> Jennifer Archer (ajener at qwest.net) wrote:
> > If you happen to discover how to recover your phone let me know! I cant
> > access anything on my phone anymore, just reboots constantly with Error
Code
> > 06 (Invalid Configuration file) I cant even press * * # for the
> > configuration!
> >
>
> Hi!
>
> During all the current development for the chan_sccp driver and the
> skinny support i can tell you didn't mess up the phone !
>
> A way (which i currently use for getting the 12SP online) is :
>
> - looking out the right image version at the phone itself
> - verify that the SAME parameters are in the Skinny answer packet
>   from asterisk (currently hard coded in chan_sccp somewhere)
> - if the parameters are the same the phone will boot.
> - and : I dont have a SEPDefault.cnf file in my tftp directory
>
> Hope that _helps_ a bit.
>
> --jan
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>