[Asterisk-Dev] Raising loop current limit on the Proslic (reg.71)

[Andrew Kohlsmith]

> Also we must consider how the proslic react to a load... 20 mA
> could became 16 if the impedance is too low, for example...
> even if *should* be standard :)

Well a current loop is regulated by definition.  Doesn't matter if the 
impedance is 0 Ohms or a meg or more; the loop voltage will move to keep 
the current at the setpoint.  IIRC that's what the SLIC register is doing, 
it's setting up the current setpoint.

Regards,
Andrew