[Asterisk-Dev] PRI Error with EWSD Switch

[Steve Hanselman]

I've added code to zaptel.c, I think the issue is at a lower level than the
PRI code.

Do you have a pointer to a good reference document for PRI Q.921/Q.931, I
need to understand the flows and states?

Steve


-----Original Message-----
From: James Golovich [mailto:james at wwnet.net] 
Sent: 20 July 2004 14:57
To: 'asterisk-dev at lists.digium.com'
Subject: RE: [Asterisk-Dev] PRI Error with EWSD Switch

If your adding code to libpri to do this, please use the facility that I
already made available.  Uncomment the LIBPRI_COUNTERS line in
libpri/Makefile then add the code to display the info to
pri.c:pri_dump_info()

James

On Tue, 20 Jul 2004, Steve Hanselman wrote:

> I'm adding in counter code as we speak so I can get a handle on what
errors
> are being generated on what spans, these will be shown in /proc/zaptel
> 
> I'll call them 1,1a,1b,1c.... :)
> 
> Steve
> 
> 
> -----Original Message-----
> From: Holger Schurig [mailto:hs4233 at mail.mn-solutions.de] 
> Sent: 20 July 2004 08:07
> To: asterisk-dev at lists.digium.com
> Subject: Re: [Asterisk-Dev] PRI Error with EWSD Switch
> 
> > Well, you've kicked me into activity (shame it's nearly time to knock
> > it on the head), ok, 8 is a bad FCS i.e. checksum error, we've an
> 
> I think the ISDN people love numbers way too much. Can't the software 
> simply say "frame checksum error?" so that people that have not read 
> Q.391 as bed lecture know what is going on?
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 
> The information contained in this email is intended for the personal and
confidential use
> of the addressee only. It may also be privileged information. If you are
not the intended
> recipient then you are hereby notified that you have received this
document in error and
> that any review, distribution or copying of this document is strictly
prohibited. If you have 
> received  this communication in error, please notify Brendata immediately
on: 
> 
> +44 (0)1268 466100, or email 'technical at brendata.co.uk' 
> 
> Brendata (UK) Ltd
> Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
> Registered Office as above. Registered in England No. 2764339
> 
> See our current vacancies at www.brendata.co.uk
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 

_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk