[Asterisk-Dev] PRI Error with EWSD Switch

[Steve Hanselman]

I'm adding in counter code as we speak so I can get a handle on what errors
are being generated on what spans, these will be shown in /proc/zaptel

I'll call them 1,1a,1b,1c.... :)

Steve


-----Original Message-----
From: Holger Schurig [mailto:hs4233 at mail.mn-solutions.de] 
Sent: 20 July 2004 08:07
To: asterisk-dev at lists.digium.com
Subject: Re: [Asterisk-Dev] PRI Error with EWSD Switch

> Well, you've kicked me into activity (shame it's nearly time to knock
> it on the head), ok, 8 is a bad FCS i.e. checksum error, we've an

I think the ISDN people love numbers way too much. Can't the software 
simply say "frame checksum error?" so that people that have not read 
Q.391 as bed lecture know what is going on?

_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk