[Asterisk-Dev] two hfc cards+ x100p (not working together)

[Tomaz]

aha ,

yes i try to put x100p out from box and everything is ok :) but once 
again .. put together slowly all 3 cards (2xhfc + 1 x100p)
and get working 2 hfc cards and loading x100p without any errors!

less /proc/zaptel/3
Span 3: WCFXO/0 "Wildcard X101P Board 1" RED

           7 WCFXO/0/0 FXSKS

but:
-- Executing Dial("SIP/101-f09f", "Zap/7/BYEXTENSION|130|t|r") in new stack
Jul  8 22:35:14 NOTICE[311316]: app_dial.c:559 dial_exec: Unable to 
create channel of type 'Zap'
  == Everyone is busy at this time

so anyone has maybe solution  to this  problem ? 
thankyou
 



clive18 at webmail.co.za wrote:

hi

I had the saem trouble, so I just took my x100p card out
and the problem went away:)

I know its not the ultimate solution, but I decided to use
an ATA with my analgue phone instead.

I would suggest trying to put the analogue lines as channel
7 and the isdn lines as channels 1-6

Good luck
regards
Clive




On Thu, 08 Jul 2004 11:52:23 +0200
 Tomaz <izol at itt.nu> wrote:

>hello,
>
>i have a problem starting asterisk with one x100p digium
>and two hfc chipset isdn cards with bri-stuff.0.0.2.
>
>
>"ztcfg -vv" shows me a this  info:
> 
>
>Zaptel Configuration
>======================
>
>SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
>
>Channel map:
>
>Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>Channel 02: Individual Clear channel (Default) (Slaves:
>02)
>Channel 03: Individual Clear channel (Default) (Slaves:
>03)
>Channel 04: D-channel (Default) (Slaves: 04)
>Channel 05: Individual Clear channel (Default) (Slaves:
>05)
>Channel 06: Individual Clear channel (Default) (Slaves:
>06)
>Channel 07: D-channel (Default) (Slaves: 07)
>
>7 channels configured.
>
>ZT_SPANCONFIG failed on span 1: Invalid argument (22)
>
>
>  
>
-------------------------------------------------------------

>cat  /etc/zaptel.conf
>
>loadzone=nl
>defaultzone=nl
>fxsks=1
>########################
>loadzone=nl  defaultzone=nl
>span=1,1,3,ccs,ami
>bchan=2-3,5-6
>dchan=4,7  
>
>and
>
># cat /etc/asterisk/zapata.conf
>
>[channels]
>switchtype = euroisdn
>; p2p TE mode
>signalling = bri_cpe
>;
>prilocaldialplan=national
>pridialplan = unknown
>;
>echocancel=yes
>group = 1
>context=isdn
>channel => 2-3,5-6
>
>group = 2
>context=gsm
>signalling=fxs_ks
>channel => 1
>
>---------------------------------------------
>but when i start asterisk i got this errors:
> 
>Parsing '/etc/asterisk/zapata.conf': Found
>Jul  8 13:53:58 WARNING[16384]: chan_zap.c:682 zt_open:
>Unable to specify channel 2: No such device or address
>Jul  8 13:53:58 ERROR[16384]: chan_zap.c:5397 mkintf:
>Unable to open channel 2: No such device or address
>here = 0, tmp->channel = 2, channel = 2
>Jul  8 13:53:58 ERROR[16384]: chan_zap.c:7668 setup_zap:
>Unable to register channel '2-3'
>Jul  8 13:53:58 WARNING[16384]: loader.c:313
>ast_load_resource: chan_zap.so: load_module failed,
>returning -1
>  == Unregistered channel type 'Tor'
>  == Unregistered channel type 'Zap'
>    -- Unregistered channel 1
>Jul  8 13:53:58 WARNING[16384]: loader.c:408
>load_modules: Loading module chan_zap.so failed!
>Segmentation fault
>
>
>what to do? i have latest CVS asterisk ..
>thank you,
>Tomaz
>  
>