[Asterisk-Dev] meetme problem

[CW_ASN - Gus]

As far as I know, ztdummy uses usb hardware. If you don't have usb enabled
in your bios setup, probably ztdummy doesn't work.


----- Original Message -----
From: "Jorge Merlino" <jorge at teledata.com.uy>
To: <asterisk-dev at lists.digium.com>
Sent: Tuesday, October 14, 2003 10:45 AM
Subject: Re: [Asterisk-Dev] meetme problem


I also have the same problem as andrea. I tried to modprobe ztdummy but I
get
this error:

/lib/modules/2.4.21-0.25mdk/kernel/drivers/usb/usb-uhci.o.gz: init_module:
No
such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
modprobe: insmod
/lib/modules/2.4.21-0.25mdk/kernel/drivers/usb/usb-uhci.o.gz
failed
modprobe: insmod usb-uhci failed

So how is usb related to the ztdummy module?

Regards,
Jorge

On Tuesday 14 October 2003 09:40, Gustavo Mársico wrote:
> You must compile ztdummy yourself. Please download zaptel using cvs,
> uncomment ztdummy and do:
>
> make
> make install
>
> Then, do a "modprobe ztdummy"
>
>
> ----- Original Message -----
> From: "andrea lazydot" <andrea at lazyredcat.com>
> To: <asterisk-dev at lists.digium.com>
> Sent: Tuesday, October 14, 2003 8:30 AM
> Subject: Re: [Asterisk-Dev] meetme problem
>
> > i no have ztdummy
> > sorry , but i cant complie it ...
> > can u send me ?
> >
> > ----- Original Message -----
> > From: "Gustavo Mársico" <cw_asn at fibertel.com.ar>
> > To: <asterisk-dev at lists.digium.com>
> > Sent: Tuesday, October 14, 2003 1:15 PM
> > Subject: Re: [Asterisk-Dev] meetme problem
> >
> > > Do you have zaptel device o ztdummy compiled in your system?
> > >
> > > ----- Original Message -----
> > > From: "andrea lazydot" <andrea at lazyredcat.com>
> > > To: <asterisk-dev at lists.digium.com>
> > > Sent: Tuesday, October 14, 2003 8:09 AM
> > > Subject: [Asterisk-Dev] meetme problem
> > >
> > > > i have this problem :
> > > >
> > > > *CLI>     -- Executing MeetMe("SIP/lazyredcat-cd45", "1234") in new
> >
> > stack
> >
> > > >   == Parsing '/etc/asterisk/meetme.conf': Found
> > > > WARNING[14351]: File app_meetme.c, Line 158 (build_conf): Unable to
>
> open
>
> > > > pseudo channel
> > > >     -- Playing 'conf-invalid'
> > > >
> > > > how to solve ?
> > > >
> > > > _______________________________________________
> > > > Asterisk-Dev mailing list
> > > > Asterisk-Dev at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-dev
> > >
> > > _______________________________________________
> > > Asterisk-Dev mailing list
> > > Asterisk-Dev at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-dev
> >
> > _______________________________________________
> > Asterisk-Dev mailing list
> > Asterisk-Dev at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-dev
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev

_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev