[Asterisk-Dev] Asterisk, MGCP, not processing RSIP

[Brady Kirby]

I have a Cisco 7960 running MGCP build 6x that I have successfully connected
to * and made inbound to and outbound calls from the phone.  When I reset
the phone it comes back up and aster configuring the IP Address goes into a
configuring Phone state.  I can telnet into the phone, and set debugging on
mgcpio and see the RSIP with parameter RM = restart, being sent to the *
server, however * does not respond to the message, nor does it act like it
received the message at all.  I can run tcpdump on the server, and take an
output file into ethereal, and see that the packet is being sent, about
every 6-25 seconds.......at that point the only way that I can get * to take
the packet and process it, is to run "mgcp audit endpoint <endpoint>", which
for the 7960 phone gets a response from the phone 510, Bad Packet, but after
that message is sent to the phone, it will still send the RSIP and * will
process it at that point.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20031113/75da7690/attachment.htm