[Asterisk-Dev] Question about quad E1

[Micke Andersson]

> 
> > And is it possible to do this via sip ? 
> 
> If you write some proprietary software to do it, you could 
> use SIP for this as SIP is just a signalling protocol. 
> However, if you mean the standard SIP/RTP combination used by 
> most SIP applications, it's not suitable for data in the 
> general case as it uses UDP as is therefore unreliable.
> 

Ok.. hm .. thought so ...

The config I was thinking about was:

PSTN -> Cisco GW -> (SIP) * (with Quadcard) -> E1 to Ciscorouter (modem
pool)

/Mike..