[asterisk-bugs] [JIRA] (ASTERISK-28666) Integration with FXO/FXS GAteway via FXO line/OPenvox card

[Asterisk Team (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-28666?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=249120#comment-249120 ] 

Asterisk Team commented on ASTERISK-28666:
------------------------------------------

Thanks for creating a report! The issue has entered the triage process. That means the issue will wait in this status until a Bug Marshal has an opportunity to review the issue. Once the issue has been reviewed you will receive comments regarding the next steps towards resolution.

A good first step is for you to review the [Asterisk Issue Guidelines|https://wiki.asterisk.org/wiki/display/AST/Asterisk+Issue+Guidelines] if you haven't already. The guidelines detail what is expected from an Asterisk issue report.

Then, if you are submitting a patch, please review the [Patch Contribution Process|https://wiki.asterisk.org/wiki/display/AST/Patch+Contribution+Process].

Please note that once your issue enters an open state it has been accepted. As Asterisk is an open source project there is no guarantee or timeframe on when your issue will be looked into. If you need expedient resolution you will need to find and pay a suitable developer. Asking for an update on your issue will not yield any progress on it and will not result in a response. All updates are posted to the issue when they occur.

> Integration with FXO/FXS GAteway via FXO line/OPenvox card
> ----------------------------------------------------------
>
>                 Key: ASTERISK-28666
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-28666
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: . I did not set the category correctly.
>    Affects Versions: 16.4.1
>         Environment: Call Out to Cicsco CUCM thru FXO line(FXO GW=Patton) failed
>            Reporter: Julien CAROFF
>
> From Asterisk/4003, I dial 60102(Cisco CUCM thru FXO patton)
> In the INVITE, I can see my TO is wrong because it dials "internally", inside Asterisk(60102 at sterisk whereas I'd like to have 60102 at FXO)
> I guess my extensions.conf is wrong. 
> Here is a sample
> [globals]
> CONSOLE=Console/dsp				; Console interface for demo
> ;CONSOLE=DAHDI/1
> ;CONSOLE=Phone/phone0
> IAXINFO=guest					; IAXtel username/password
> ;IAXINFO=myuser:mypass
> TRUNK=DAHDI/G2					; Trunk interface
> exten => 60102,4,Dial(DAHDI/1/${EXTEN})
> And here is a sample from dahdi-channels.conf
> ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) 
> ;;; line="1 WCTDM/4/0"
> signalling=fxo_ks
> callerid="Channel 1" <4001>
> mailbox=4001
> group=5
> context=from-internal
> channel => 1
> callerid=
> mailbox=
> group=
> context=default
> Pls help
> FYI, incoming call is OK



--
This message was sent by Atlassian JIRA
(v6.2#6252)