[asterisk-bugs] [JIRA] (ASTERISK-22860) overlap dial doesn't work, TE420-panasonic kx-td500

[Dmitry Melekhov (JIRA)]

    [ https://issues.asterisk.org/jira/browse/ASTERISK-22860?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=211900#comment-211900 ] 

Dmitry Melekhov commented on ASTERISK-22860:
--------------------------------------------

btw, this is debug from working asterisk:
PRI Span: 1 Received message for call 0xb630eb28 on link 0xa0596ac TEI/SAPI 0/0
PRI Span: 1 -- Processing Q.931 Call Setup
PRI Span: 1 -- Processing IE 4 (cs0, Bearer Capability)
PRI Span: 1 -- Processing IE 24 (cs0, Channel ID)
PRI Span: 1 -- Processing IE 108 (cs0, Calling Party Number)
PRI Span: 1 -- Processing IE 112 (cs0, Called Party Number)
PRI Span: 1 q931.c:8646 post_handle_q931_message: Call 15151 enters state 6 (Call Present).  Hold state: Idle
Span 1: Processing event PRI_EVENT_RING(5)
PRI Span: 1 q931.c:5779 q931_setup_ack: Call 15151 enters state 25 (Overlap Receiving).  Hold state: Idle
PRI Span: 1 


after PRI_EVENT_RING(5) it enters to overlap receiving state.

I don't see any  config differences :-(

btw, both asterisk are compiled with libpri-1.4.14.
working asterisk is 11.5 , asterisk with problem - 11.6...




                
> overlap dial doesn't work, TE420-panasonic kx-td500
> ---------------------------------------------------
>
>                 Key: ASTERISK-22860
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-22860
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_dahdi
>    Affects Versions: 11.6.0
>         Environment: Centos 6.4/x86-64
>            Reporter: Dmitry Melekhov
>         Attachments: chan_dahdi.conf, overlap-pri.debug, pri-show-span.txt, system.conf
>
>
> Hello!
> We successfully run two asterisks connected to panasonic kx-td500 as pri-h323 gateways. These kxtd-500 have slightly older firmware, but this panasonic was and is (by another link) connected to avaya definity and everything works OK.
> Other asterisks have TE122, this one 4 span TE420:
> 03:08.0 Communication controller: Digium, Inc. Wildcard TE420 quad-span T1/E1/J1 card 3.3V (PCI-Express) (5th gen) (rev 02)
> Panasonic have to send 3 digits in setup and then overlap.
> But I get:
>    -- Span 4: Extension 123 at panas does not exist.  Rejecting call from '6789'.
> I'll attach console debug, and chan_dahdi.conf.
> We tried to switch pri_network/pri_cpe sides, but result is the same.
> Looks like bug.
> Thank you!

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira