[asterisk-bugs] [JIRA] (ASTERISK-22860) overlap dial doesn't work, TE420-panasonic kx-td500

[Dmitry Melekhov (JIRA)]

     [ https://issues.asterisk.org/jira/browse/ASTERISK-22860?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Dmitry Melekhov updated ASTERISK-22860:
---------------------------------------

    Description: 
Hello!

We successfully run two asterisks connected to panasonic kx-td500 as pri-h323 gateways. These kxtd-500 have slightly older firmware, but this panasonic was and is (by another link) connected to avaya definity and everything works OK.
Other asterisks have TE122, this one 4 span TE420:

03:08.0 Communication controller: Digium, Inc. Wildcard TE420 quad-span T1/E1/J1 card 3.3V (PCI-Express) (5th gen) (rev 02)


Panasonic have to send 3 digits in setup and then overlap.
But I get:

   -- Span 4: Extension 123 at panas does not exist.  Rejecting call from '6789'.

I'll attach console debug, and chan_dahdi.conf.

We tried to switch pri_network/pri_cpe sides, but result is the same.

Looks like bug.
Thank you!


  was:
Hello!

We successfully run two asterisks connected to panasonic kx-td500 as pri-h323 gateways. These kxtd-500 has slightly older firmware, but this panasonic was and is (by another link) connected to avaya definity and everything works OK.
Other asterisks have TE122...

Panasonic have to send 3 digits in setup and then overlap.
But I get:

   -- Span 4: Extension 123 at panas does not exist.  Rejecting call from '6789'.

I'll attach console debug, and chan_dahdi.conf.

We tried to switch pri_network/pri_cpe sides, but result is the same.

Looks like bug.
Thank you!


    
> overlap dial doesn't work, TE420-panasonic kx-td500
> ---------------------------------------------------
>
>                 Key: ASTERISK-22860
>                 URL: https://issues.asterisk.org/jira/browse/ASTERISK-22860
>             Project: Asterisk
>          Issue Type: Bug
>      Security Level: None
>          Components: Channels/chan_dahdi
>    Affects Versions: 11.6.0
>         Environment: Centos 6.4/x86-64
>            Reporter: Dmitry Melekhov
>         Attachments: chan_dahdi.conf, overlap-pri.debug, pri-show-span.txt, system.conf
>
>
> Hello!
> We successfully run two asterisks connected to panasonic kx-td500 as pri-h323 gateways. These kxtd-500 have slightly older firmware, but this panasonic was and is (by another link) connected to avaya definity and everything works OK.
> Other asterisks have TE122, this one 4 span TE420:
> 03:08.0 Communication controller: Digium, Inc. Wildcard TE420 quad-span T1/E1/J1 card 3.3V (PCI-Express) (5th gen) (rev 02)
> Panasonic have to send 3 digits in setup and then overlap.
> But I get:
>    -- Span 4: Extension 123 at panas does not exist.  Rejecting call from '6789'.
> I'll attach console debug, and chan_dahdi.conf.
> We tried to switch pri_network/pri_cpe sides, but result is the same.
> Looks like bug.
> Thank you!

--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators: https://issues.asterisk.org/jira/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira