[asterisk-bugs] [DAHDI-linux 0013897]: [patch] Support for generic HFC-4S cards

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=13897 
====================================================================== 
Reported By:                tzafrir
Assigned To:                tzafrir
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   13897
Category:                   wcb4xxp
Reproducibility:            N/A
Severity:                   feature
Priority:                   normal
Status:                     ready for testing
====================================================================== 
Date Submitted:             2008-11-13 16:17 CST
Last Modified:              2009-06-15 10:19 CDT
====================================================================== 
Summary:                    [patch] Support for generic HFC-4S cards
Description: 
A patch to add some basic support of other HFC-4S -based PCI cards (such as
the ones made by Junghanns). 

Status: gets rid of the echo canceller messages when not needed, but still
needs work.

Specifically:
* It adds too broad a range of cards (which also include bero.net cards) 
* The range may include some 2-ports cards, which will probably not work.

Not yet tested to work, though it it is at least configured.

====================================================================== 

---------------------------------------------------------------------- 
 (0106402) schinkelm (reporter) - 2009-06-15 10:19
 https://issues.asterisk.org/view.php?id=13897#c106402 
---------------------------------------------------------------------- 
@heruan:

xelinaf: "Check the PCI latencies of your other(!) PCI cards."

Look at the output of "lspci -vvt" and see which other cards are on the
same pci bus with your bri card. Then check for these cards if any of them
has a latency higher than 32 and set it to 32 (= 20 in hex) if so. 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-06-15 10:19 schinkelm      Note Added: 0106402                          
======================================================================