[asterisk-bugs] [DAHDI-linux 0013897]: [patch] Support for generic HFC-4S cards

[Asterisk Bug Tracker]

A NOTE has been added to this issue. 
====================================================================== 
https://issues.asterisk.org/view.php?id=13897 
====================================================================== 
Reported By:                tzafrir
Assigned To:                tzafrir
====================================================================== 
Project:                    DAHDI-linux
Issue ID:                   13897
Category:                   wcb4xxp
Reproducibility:            N/A
Severity:                   feature
Priority:                   normal
Status:                     ready for testing
====================================================================== 
Date Submitted:             2008-11-13 16:17 CST
Last Modified:              2009-06-15 10:11 CDT
====================================================================== 
Summary:                    [patch] Support for generic HFC-4S cards
Description: 
A patch to add some basic support of other HFC-4S -based PCI cards (such as
the ones made by Junghanns). 

Status: gets rid of the echo canceller messages when not needed, but still
needs work.

Specifically:
* It adds too broad a range of cards (which also include bero.net cards) 
* The range may include some 2-ports cards, which will probably not work.

Not yet tested to work, though it it is at least configured.

====================================================================== 

---------------------------------------------------------------------- 
 (0106401) heruan (reporter) - 2009-06-15 10:11
 https://issues.asterisk.org/view.php?id=13897#c106401 
---------------------------------------------------------------------- 
The card works with Zaptel, qozap module and Asterisk 1.4. But I can't find
the qozap module for DAHDI...

# lspci -vv
00:0e.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller
[HFC-4S] (rev 01)
        Subsystem: Cologne Chip Designs GmbH HFC-4S [Junghanns DuoDBRI]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 1cd0 [size=8]
        Region 1: Memory at fe004000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: wcb4xxp 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2009-06-15 10:11 heruan         Note Added: 0106401                          
======================================================================