[asterisk-bugs] [Asterisk-GUI 0013122]: Simple changes in GUI affecting Zap trunks

[Asterisk Bug Tracker]

The following issue has been CLOSED 
====================================================================== 
http://bugs.digium.com/view.php?id=13122 
====================================================================== 
Reported By:                msales
Assigned To:                bkruse
====================================================================== 
Project:                    Asterisk-GUI
Issue ID:                   13122
Category:                   General
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     closed
Asterisk Version:           1.4.18 
SVN Branch (only for SVN checkouts, not tarball releases): N/A 
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
Resolution:                 reopened
Fixed in Version:           
====================================================================== 
Date Submitted:             2008-07-21 09:44 CDT
Last Modified:              2008-08-11 02:14 CDT
====================================================================== 
Summary:                    Simple changes in GUI affecting Zap trunks
Description: 
Scenario:

Asterisk box with TDM400 with 3 FXO and 1 FXS modules.  Calling rules are
set so that outbound calls go out the 3 FXO ports.  I go into the GUI and
change the name of a user, click save, then click Activate Changes.  Now,
when I try to dial out of outbound trunk the calls are going out of the FXS
port not 1 of the 3 FXOs.  I have to issue a "restart now" command to get
the trunks working correctly.

ZAP/1 - ZAP/3 are my FXO
ZAP/4 is FXS

I also have this same issue on another server with a TDM2400

Here is the correct info from the CLI:

Executing [95281038 at numberplan-custom-1:1] Macro("SIP/6004-085c1858",
"trunkdial|Zap/G1/5281038") in new stack
    -- Executing [s at macro-trunkdial:1] Set("SIP/6004-085c1858",
"CALLERID(all)=") in new stack
    -- Executing [s at macro-trunkdial:2] Dial("SIP/6004-085c1858",
"Zap/G1/5281038") in new stack
    -- Called G1/5281038
    -- Zap/3-1 answered SIP/6004-085c1858
    -- Hungup 'Zap/3-1'

Here is the incorrect info from the CLI after changing a name in users in
the GUI:

Executing [95281038 at numberplan-custom-1:1] Macro("SIP/6004-085d67a8",
"trunkdial|Zap/G1/5281038") in new stack
    -- Executing [s at macro-trunkdial:1] Set("SIP/6004-085d67a8",
"CALLERID(all)=") in new stack
    -- Executing [s at macro-trunkdial:2] Dial("SIP/6004-085d67a8",
"Zap/G1/5281038") in new stack
    -- Called G1/5281038
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Hungup 'Zap/4-1'

====================================================================== 

---------------------------------------------------------------------- 
 (0091279) bkruse (manager) - 2008-08-11 02:14
 http://bugs.digium.com/view.php?id=13122#c91279 
---------------------------------------------------------------------- 
Fixed with the new gui 
(branches/2.0)

These issues should be resolved.

(Installation instructions, as always, here:
http://asterisknow.org/install-related )

-bk 

Issue History 
Date Modified    Username       Field                    Change               
====================================================================== 
2008-08-11 02:14 bkruse         Note Added: 0091279                          
2008-08-11 02:14 bkruse         Status                   assigned => closed  
======================================================================