[Asterisk-bsd] how can i edit the file to make calls!

[Richard Neese]

ing the i4b capi channel dir there is a conf file called capi.conf this needs 
to be coppied to /usr/local/etc/asterisk and then edited






On January 9, 2008 07:00:34 pm lizhong zhu wrote:
> hello, all of friends:
> thanks, Richard Neese. i edit the kernel and add what you gave me and
> recompile kernel, the isdn and capi seems work. i run isdnconfig it show s
> four contralloer. my card is OpenVox B400P. now asterisk can start and show
> : new-host-3*CLI> capi show channels
> CAPI thread [0x0] {
>  Application ID     : 0x00000000
>  Application uptime : 0x00000945 seconds
>
>  Call descriptor statistics:
>     allocation count        : 0x00000000 call descriptors
>     free count              : 0x00000000 call descriptors
>     in memory count         : 0x00000000 call descriptors
>     in use count            : 0x00000000 call descriptors
>     record allocation rate  :     0x0000 calls/second
>     limit allocation rate   :     0x0010 calls/second
>  Currently active calls:
>     channel name, source->destination, call ID, in/out
> }
> Config entry 'ISDN2' {
>  b_channels_curr : 2 call descriptor(s) free
>  b_channels_max  : 2 call descriptor(s) total
> }
> Config entry 'ISDN1' {
>  b_channels_curr : 2 call descriptor(s) free
>  b_channels_max  : 2 call descriptor(s) total
> }
>
> new-host-3*CLI>
> i have no idea for capi.conf for BRI. the LEDs are not blink. i would set
> all 4 ports are in TE mode. anyone can tell me some setting for how to
> start isdn4bsd and as capi.conf ? thanks!
> zhu
>
>
> ---------------------------------
> 雅虎邮箱传递新年祝福，个性贺卡送亲朋！



-- 
Welcome to the World. An the World gets smaller.