[Asterisk-bsd] Digium b410p with i4b

[Mikael Batard]

Hi,

i'm trying to make the digium b410p (quadbri) card works on FreeBSD 6.2 with i4b
(svn trunk revision 467).

The card is detected :
$ pciconf -vl
none2 at pci6:1:0: class=0x020400 card=0xb410d161 chip=0xb410d161 rev=0x01 hdr=0x00
    class    = network
    subclass = ISDN

But it seems that i4b doesn't recognize it.

I have another ISDN card which is detected and works :
$ pciconf -vl
ihfc0 at pci6:2:0: class=0x028000 card=0x2bd01397 chip=0x2bd01397 rev=0x02 hdr=0x00
    vendor   = 'Cologne Chip Designs GmbH'
    device   = 'HFC-S PCI A ISDN 2BDS0 ISDN HDLC FIFO Controller'
    class    = network

$ isdnconfig
controller 0 = {
  Layer 1:
    description : HFC-2BDS0 128K PCI ISDN adapter
    type        : passive ISDN (Basic Rate, 2xB)
    channels    : 0x3
    serial      : 0xabcd
    power_save  : on
    dialtone    : enabled
    attached    : yes
    PH-state    : F3: Deactivated
  Layer 2:
    driver_type : DRVR_D_CHANNEL
}

But maybe there is an another way to make the B410P works or a specific
configuration to apply with i4b ?

Thanks for your help.
-- 
Mikael Batard
Wan Again
12 Route de l'Isle
84510 Caumont sur Durance
Tel: +33 (0)4 90 01 26 86
Fax: +33 (0)4 90 23 10 58
http://www.wanagain.fr/