[Asterisk-bsd] RE: Zaptel

[John S. Strock]

Thanks Simpson,

 

I do have the options you've specificed in my Zapata.conf file.  You mention
the extenions.conf file for outbound, does that also affect inbound?
Outbound callerid is fine, it's the inbound caller id that's not working.  I
tested to see if caller id information was being sent (and not being
blocked) by our phone provider by calling from one phone to another, then
calling from that same phone into the asterisk pbx, but when it gets into
the pbx, it displays "unknown".

 

Regarding fixing my original problem, I think most of the issue had to do
with not having zaptel_enable="YES" in my rc.conf file.  Installing asterisk
from the FreeBSD ports installed everything I needed included the .ko
modules. Once I enabled zaptel in rc.conf, then I took a little more time
going through the zapatel.conf, and zaptel.conf files to figure out how to
configure.  This biggest hang up was the rc.conf file because I was getting
errors where documentation was saying I shouldn't.

 

Thanks again,

 

John 

 

  _____  

From: Simpson Chua [mailto:strain17 at yahoo.com] 
Sent: Wednesday, May 30, 2007 12:21 pm
To: John S. Strock
Subject: RE: Zaptel

 

Hi,

Please check your zapata.conf file and make sure it has these fields below
[channels]:
usecallerid=yes
hidecallerid=no
usecallingpres=yes
callwaitingcallerid=yes

Try to see if that works. If not, you might have to check how you setup your
outbound dialing in extensions.conf.

Let me know.

Simpson

P.S. If you can, please update the BSD list to let the community know how
you were able to resolve your problem. It might be beneficial to future
users. Thanks again!

"John S. Strock" <jstrock at batc.edu> wrote:

Thank you for your help.  I was able to get everything working both inbound
and outbound, and I've got one last question (for now), how do I enable
inbound caller ID?  All inbound calls show up as unknown, yet all phone that
I tested allow caller ID to be sent.

 

Thanks again,

 

John 

 

  _____  

From: Simpson Chua [mailto:strain17 at yahoo.com] 
Sent: Tuesday, May 29, 2007 11:53 pm
To: jstrock
Subject: Zaptel

 

John,

Forgot one more thing, once you ztcfg -vvvvvvvv, you need to login to the
Asterisk CLI (asterisk -rvvvvvvvc) and do a "restart gracefully" to reload
the zap channels.

It should be working now.

In the CLI - a "zap show channels" should show you the status of the
channels.

Let me know how it goes.

Simpson

  

  _____  

Get
<http://us.rd.yahoo.com/evt=48226/*http:/new.toolbar.yahoo.com/toolbar/featu
res/norton/index.php>  the free Yahoo! toolbar and rest assured with the
added security of spyware protection. 

 

  

  _____  

Need a vacation? Get
<http://us.rd.yahoo.com/evt=48256/*http:/travel.yahoo.com/;_ylc=X3oDMTFhN2hu
cjlpBF9TAzk3NDA3NTg5BHBvcwM1BHNlYwNncm91cHMEc2xrA2VtYWlsLW5jbQ-->  great
deals to amazing places on Yahoo! Travel. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20070531/f3de23fc/attachment.htm