[Asterisk-bsd] libpri for FBSD 6.1 and 1.2.11

[Bill Harris]

Name only.  Did the same on the PRI box, and incoming calls
off the PRI show the same, name only.   The number field is empty.

Am I missing a vital option in my zapata.conf?  Here's all that I have
in it.

[channels]
switchtype=national
context=pri_att
signalling=pri_cpe
echocancel=64
rxgain=-4.0
txgain=-5.5
group=1
channel => 1-23
usecallerid=yes
hidecallerid=no


Bill



On Sep 14, 2006, at 4:30 AM, Dinesh Nair wrote:

>
>
> On 09/14/06 11:54 Bill Harris said the following:
>> PRI is up, and has been working well since last Friday.  Amazing
>> how little CPU this board is using compared to the 4 port card.
>
> well done, bill.
>
>> CallerID[number].   The * box that the phones are registered to is
>> getting caller/number from the PRI box over IAX, because I see
>> the numbers in the CDR records of the destination * server.
>
> on the box which is driving the cisco phones, what does Noop($ 
> {CALLERID(name)}) and Noop(${CALLERID(num)}) show ? add these in  
> before the Dial() is made to the cisco phones and look for the  
> output on the console.
>
> -- 
> Regards,                           /\_/\   "All dogs go to heaven."
> dinesh at alphaque.com                (0 0)   http:// 
> www.openmalaysiablog.com/
> +==========================----oOO--(_)--OOo---- 
> ==========================+
> | for a in past present future;  
> do                                        |
> |   for b in clients employers associates relatives neighbours  
> pets; do   |
> |   echo "The opinions here in no way reflect the opinions of my $a  
> $b."  |
> | done;  
> done                                                              |
> +===================================================================== 
> ====+
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd