[Asterisk-bsd] libpri for FBSD 6.1 and 1.2.11

[Rodrigo Galiano Celestino]

Ok, no prob. Thanks anyways.

-----Original Message-----
From: asterisk-bsd-bounces at lists.digium.com
[mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Dinesh Nair
Sent: quinta-feira, 14 de Setembro de 2006 10:30
To: Asterisk on BSD discussion
Subject: Re: [Asterisk-bsd] libpri for FBSD 6.1 and 1.2.11



On 09/14/06 11:54 Bill Harris said the following:
> 
> 
> 
> PRI is up, and has been working well since last Friday.  Amazing
> how little CPU this board is using compared to the 4 port card.

well done, bill.

> CallerID[number].   The * box that the phones are registered to is
> getting caller/number from the PRI box over IAX, because I see
> the numbers in the CDR records of the destination * server.

on the box which is driving the cisco phones, what does 
Noop(${CALLERID(name)}) and Noop(${CALLERID(num)}) show ? add these in 
before the Dial() is made to the cisco phones and look for the output on 
the console.

-- 
Regards,                           /\_/\   "All dogs go to heaven."
dinesh at alphaque.com                (0 0)   http://www.openmalaysiablog.com/
+==========================----oOO--(_)--OOo----==========================+
| for a in past present future; do                                        |
|   for b in clients employers associates relatives neighbours pets; do   |
|   echo "The opinions here in no way reflect the opinions of my $a $b."  |
| done; done                                                              |
+=========================================================================+
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSD at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd