[Asterisk-bsd] Asterisk Fails to Run

Tim St. Pierre tim at communicatefreely.net
Tue Sep 12 08:16:12 MST 2006


I had this happen to me too, and I don't even have pgsql installed.  Try 
adding noload => cdr_pgsql.so to your modules.conf so that it doesn't try to 
load that module.

-Tim

On September 12, 2006 05:42, Frank Griffith wrote:
> The time finally came for me to move * off my test server and place it on
> another machine so as to eliminate the test box.
>
>   First off this machine is an old P166 with 96MB of RAM but I'm only using
> * for personal use, 1 call at a time so I've got to believe it will work. I
> installed the ports collection, updated it with portsnap and then ran the
> install. It took over 24 hours for the build to complete and this time I
> got it to build without having to modify the Makefile. That's a new one for
> me as I usually had to add WITHOUT_FAX=1 to get it to work on some other
> machines.
>
>   Second, zaptel did not appear to get configured right. When it was all
> over there was a /usr/local/etc/zaptel.sh but it's no good. Won't load
> anything. So I copied over the zaptel.sh file from the other machine and
> zaptel.ko and ztdummy.ko, etc all loaded fine.
>
>   Third, and worst of all, this machine has PostgreSQL on it from some
> previous work I was doing with it. But I did not install PostgreSQL from
> the ports. I built it from source. pgsql works fine on this machine. But
> for some reason * starts looking for it and the last lines of the CLI
> screen, before * exits is this:
>
>   [cdr_pgsql.so]Sep 12 05:12:33 WARNING[2302]: loader.c:325
> __load_resource: Shared object "libpq.so.4" not found, required by
> "cdr_pgsql.so" Sep 12 05:12:33 WARNING[2302]: loader.c:554 load_modules:
> Loading module cdr_pgsql.so failed! Ouch ... error while writing audio
> data: : Broken Pipe
>
>   I don't really know how to attack this problem. Can anyone offer some
> advice on what this means? I don't use PostgreSQL with * for now and don't
> know why * is looking for it. Further, why does * exit? Is it due to pgsql
> or is the Broken Pipe message the clue here?
>
>
>
> ---------------------------------
> Do you Yahoo!?
>  Everyone is raving about the  all-new Yahoo! Mail.

-- 
Tim St. Pierre

IP telephony specialist
sip://5101@communicatefreely.net
Toronto: 647 722 6930
Toll-Free 1 888 488 6940
tim at communicatefreely.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-bsd/attachments/20060912/bc7d0a3e/attachment.pgp


More information about the Asterisk-BSD mailing list