[Asterisk-bsd] Can't Configure X100P card

[Frank Griffith]

# cat /dev/wcfxo0
  WCFXO/o
  Wildcard X101P Board 1
  Port #1 -- FXO [off]
  

Oleksandr Tymoshenko <gonzo at pbxpress.com> wrote:
  Frank Griffith wrote:
> I changed out the cable and made the change to my zaptel.conf file. 
> Still RED.
> 
> Also when I run zttool and press F1 or F10 nothing happens. I can select 
> the card using my tab key to highlight the select button and see the 
> details. But it's still dead.
> 
> Anymore suggestions would be appreciated. Thanks again for your reply.
Show "cat /dev/wcfxo0" output on your box.
-- 
Sincerely,

Oleksandr Tymoshenko
PBXpress Communications, Inc.
http://www.pbxpress.com
Tel./Fax.: +1 866 SIP PBX1 Ext. 656
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSD at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd


 			
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20061004/753f113c/attachment.htm