[Asterisk-bsd] Problem module FXS on TDM22B

[Aaron Seelye]

I had a problem with my TDM02B last week, found moving from 0.11 to the svn 
version greatly improved it.  It also mentions a problem with powerup, did 
you plug in the molex connector?

-Aaron
----- Original Message ----- 
From: "m.sodic" <m.sodic at wanadoo.fr>
To: <asterisk-bsd at lists.digium.com>
Sent: Sunday, May 21, 2006 2:56 PM
Subject: [Asterisk-bsd] Problem module FXS on TDM22B


> Hello all
>
> I have a problem with my TDM22B since 3 days, I tried  to install 
> correctly the module FXS by the driver zaptel  from the port witch is 
> zaptel-0.11
>
> The TDM22B is a TDM400 with 2 FXS and 2 FXO this my zaptel.conf
> fxoks=1-2
> fxsks=3-4
> loadzone=fr
> defaultzone=fr
>
>
> and from the dmesg i get this :
>
> Local package initialization:Zapata Telephony Interface Registered on 
> major 196
> FXS device: vendor=e159 device=1 subvendor=b119
> wcfxs0: <Wildcard TDM400P REV I> port 0x2000-0x20ff mem 
> 0xfd000000-0xfd000fff ir
> q 16 at device 2.0 on pci1
> FXS Attach for wcfxs0: deviceID : 0xe159
> wcfxs0: [GIANT-LOCKED]
> Freshmaker version: 73
> Freshmaker passed register test
> ProSLIC on module 0 failed to powerup within 501 ms (0 mV only)
> Unable to do INITIAL ProSLIC powerup on module 0
> ProSLIC on module 0 failed to powerup within 501 ms (0 mV only)
> Unable to do INITIAL ProSLIC powerup on module 0
> Module 0: FAILED FXS
> ProSLIC on module 1 failed to powerup within 501 ms (0 mV only)
> Unable to do INITIAL ProSLIC powerup on module 1
> ProSLIC on module 1 failed to powerup within 501 ms (0 mV only)
> Unable to do INITIAL ProSLIC powerup on module 1
> Module 1: FAILED FXS
> Module 2: Installed -- AUTO FXO
> Module 3: Installed -- AUTO FXO
> Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
> Keyword: [fxsks], Value: [3-4]
> Keyword: [fxoks], Value: [1-2]
> Keyword: [loadzone], Value: [fr]
> Keyword: [defaultzone], Value: [fr]
>
> I would like to understand why my card doesn't installed the module FXS 
> correctly witch are on the port number 1-2 . FXO on 3-4
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>