[Asterisk-bsd] Problem module FXS on TDM22B

[m.sodic]

Hello all

I have a problem with my TDM22B since 3 days, I tried  to install  
correctly the module FXS by the driver zaptel  from the port witch is 
zaptel-0.11

The TDM22B is a TDM400 with 2 FXS and 2 FXO this my zaptel.conf
fxoks=1-2
fxsks=3-4
loadzone=fr
defaultzone=fr


and from the dmesg i get this :

Local package initialization:Zapata Telephony Interface Registered on 
major 196
FXS device: vendor=e159 device=1 subvendor=b119
wcfxs0: <Wildcard TDM400P REV I> port 0x2000-0x20ff mem 
0xfd000000-0xfd000fff ir
q 16 at device 2.0 on pci1
FXS Attach for wcfxs0: deviceID : 0xe159
wcfxs0: [GIANT-LOCKED]
Freshmaker version: 73
Freshmaker passed register test
ProSLIC on module 0 failed to powerup within 501 ms (0 mV only)
Unable to do INITIAL ProSLIC powerup on module 0
ProSLIC on module 0 failed to powerup within 501 ms (0 mV only)
Unable to do INITIAL ProSLIC powerup on module 0
Module 0: FAILED FXS
ProSLIC on module 1 failed to powerup within 501 ms (0 mV only)
Unable to do INITIAL ProSLIC powerup on module 1
ProSLIC on module 1 failed to powerup within 501 ms (0 mV only)
Unable to do INITIAL ProSLIC powerup on module 1
Module 1: FAILED FXS
Module 2: Installed -- AUTO FXO
Module 3: Installed -- AUTO FXO
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
Keyword: [fxsks], Value: [3-4]
Keyword: [fxoks], Value: [1-2]
Keyword: [loadzone], Value: [fr]
Keyword: [defaultzone], Value: [fr]

I would like to understand why my card doesn't installed the module FXS 
correctly witch are on the port number 1-2 . FXO on 3-4