[Asterisk-bsd] X100P - "Failed to initailize DAA"
Chris Hastie
lists at oak-wood.co.uk
Sun May 21 03:07:21 MST 2006
I'm struggling to get a X100P 'compatible' card working on FreeBSD
5.4-RELEASE.
Only in the third PCI slot I tried was it recognised at all. Now it is
recognised I get the following error when loading the drivers:
Zapata Telephony Interface Registered on major 196
ZapTel device: vendor=1057 device=5608 subvendor=1057
wcfxo0: <Wildcard X100P> port 0xa000-0xa0ff mem 0xe0100000-0xe0100fff
irq 16 at device 5.0 on pci0
ZapTel Attach for wcfxo0: deviceID : 0x1057
Failed to initailize DAA, giving up...
Freed a Wildcard
ZapTel detach!
We failed: 5
device_attach: wcfxo0 attach returned 5
Does anyone have any clues as to how to resolve this?
Here is the full output of dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Fri Apr 14 09:20:05 GMT 2006
chris at ash.oak-wood.co.uk:/usr/obj/usr/src/sys/ASH54
ACPI APIC Table: <VT8375 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2200+ (1799.69-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 503250944 (479 MB)
avail memory = 482779136 (460 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT8375 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA XM266 (PM266/KM266) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 5.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xac00-0xac1f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xb000-0xb00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xb800-0xb8ff mem 0xe0102000-0xe01020ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0c:76:1d:f7:70
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1799690488 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 25 packets/entry by default
ad0: 57241MB <ST360012A/3.31> [116301/16/63] at ata0-master UDMA100
ad1: 76319MB <ST380011A/8.01> [155061/16/63] at ata0-slave UDMA100
ad2: 57241MB <ST360012A/3.31> [116301/16/63] at ata1-master UDMA100
acd0: CDROM <54X CD-ROM/VER 6.43> at ata1-slave PIO4
Mounting root from ufs:/dev/gvinum/rootvol
Zapata Telephony Interface Registered on major 196
ZapTel device: vendor=1057 device=5608 subvendor=1057
wcfxo0: <Wildcard X100P> port 0xa000-0xa0ff mem 0xe0100000-0xe0100fff irq 16 at device 5.0 on pci0
ZapTel Attach for wcfxo0: deviceID : 0x1057
Failed to initailize DAA, giving up...
Freed a Wildcard
ZapTel detach!
We failed: 5
device_attach: wcfxo0 attach returned 5
and pciconf:
agp0 at pci0:0:0: class=0x060000 card=0x31161106 chip=0x31161106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8375 ProSavageDDR PM266/KM266 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0911106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'VT8633 Apollo Pro 266 CPU to AGP Controller'
class = bridge
subclass = PCI-PCI
wcfxo0 at pci0:5:0: class=0x078000 card=0x00001057 chip=0x56081057 rev=0x00 hdr=0x00
vendor = 'Motorola'
device = 'SM56 PCI Fax Voice Modem'
class = simple comms
uhci0 at pci0:16:0: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1 at pci0:16:1: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci2 at pci0:16:2: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
none0 at pci0:16:3: class=0x0c0320 card=0x73801462 chip=0x31041106 rev=0x82 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0 at pci0:17:0: class=0x060100 card=0x31771106 chip=0x31771106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8235 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:17:1: class=0x01018a card=0x73801462 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
none1 at pci0:17:5: class=0x040100 card=0x73801462 chip=0x30591106 rev=0x50 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
vr0 at pci0:18:0: class=0x020000 card=0x738c1462 chip=0x30651106 rev=0x74 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller'
class = network
subclass = ethernet
none2 at pci1:0:0: class=0x030000 card=0x73891462 chip=0x8d045333 rev=0x00 hdr=0x00
vendor = 'S3 Graphics Co., Ltd.'
device = '86C420 ProSavage DDR'
class = display
subclass = VGA
ztcfg produces:
Keyword: [fxsks], Value: [1]
Keyword: [loadzone], Value: [uk]
Keyword: [defaultzone], Value: [uk]
ZT_CHANCONFIG failed on channel 1: Device not configured (6)
--
Chris Hastie
More information about the Asterisk-BSD
mailing list