[Asterisk-bsd] Capi and rintone

[Hans Petter Selasky]

On Sunday 25 June 2006 18:52, Matthias Fechner wrote:
> Hello Hans,
>
> * Hans Petter Selasky <hselasky at c2i.net> [25-06-06 16:43]:
> > You are dialing out to a TE-mode controller, right? You are not dialing a
> > NT-mode controller.
> >
> > If TE-mode, then try adding "/bl" option for "early-B3" and "late
> > signalling", like this:
> >
> > exten => s,3,Dial(CAPI/ISDN1/${CALLNUMBER[${CALLERIDNUM}]}:${DIALSTR}/bl)
>
> my phone is connected to a nt-mode card, then the calls goes out via a
> second card in te mode (connected to the NTBA).
> If i set /b1 on the calling command and i dial and then hangup
> the call will not terminate it contious to ring until I restart
> asterisk.

It is "b" and "l" (ell) not "1" (one). You can skip the "l".

Are you sure that you hangup the call at the end:

exten => s,4,Hangup

--HPS